• siemens LOGO schrift weglassen
1 1

Time relay ON-delayed

€3,90 EUR
€3,90 EUR
Sale Sold out
Description

The FB_DelayRelayTON function block combines a switch-on delay (TON) with NO/NC contacts for main and auxiliary circuits. It supports reset, deactivation, and a simulation mode, detects invalid operating states, and ensures that outputs are only switched after the specified delay time has elapsed.

Note: This module is designed as a template. Before use in real systems, it must be integrated, tested, and approved by qualified personnel. Incorrect integration may lead to unexpected behavior.

How it works
Reset

Clears all outputs, resets the time, and turns off the timer. Errors are cleared.

Disabled

If the block is not activated, all outputs remain off, the time is reset and an error is reported.

simulation

The delay logic runs in a simulated manner. The output behaves as if the timer has completed, without affecting any real actuators. The status and diagnostic code indicate simulation operation.

Normal operation

The TON timer processes the input signal. After the preset time has elapsed, the NO/NC contacts are switched accordingly. The current elapsed time is displayed, and errors are reset.

Technical details
  • Inputs: #Enable , #Reset , #SimMode , #Coil_A1 , #PT
  • Timer: #tonInst (TON, switch-on delay)
  • Outputs / feedback: #Klemme13/14 , #Klemme21/22 , #Klemme31/32 , #Klemme41/42 , #ET
  • Status & Diagnosis: #Error , #Status , #DiagnosticCode
  • Diagnosis codes (selection):
    • 0 – OK
    • 1002 – Disabled
    • 1004 – Simulation mode active
Possible applications
  • Integration into process and time controls for delayed switching of contacts after prior testing
  • Pre-validation of switching sequences in simulation mode
  • Support in detecting state deviations through delayed feedback
  • Combined use of main and auxiliary contacts for safe switching states

Note: Before productive use, a complete technical acceptance and release by qualified personnel is required.

compatibility
  • Siemens S7-1200 & S7-1500 controllers
  • Suitable for TIA Portal with SCL support
  • Integration into higher-level control architectures possible
  • Testable in simulation mode without real actuators
Scope of delivery

You receive:

  • An SCL file with implemented function block
  • Complete declaration of inputs and outputs as well as timer instance
  • Annotated structure for quick adaptation
  • Quick guide for integration into a TIA project

The download link will be provided after purchase.

Support

I am happy to support you with:

  • Adjusting the delay time and logic parameters
  • Integration into higher-level control processes or HMI
  • Interpretation of status and diagnostic information
  • Extension for special use cases

Contact is possible via shop message or email. Individual adjustments are available as optional customizations.